Citrus Springs FL Heating and Cooling

Charles L.

Installed a whole-home germicidal UV light system today. Used RGF REME HALO-LED air purification device, mounting it in the supply plenum of the existing HVAC system. Wired the unit to a dedicated 24V transformer. Secured mounting bracket with self-tapping screws. Installed the UV lamp, ensuring proper alignment with airflow. Sealed connections with silicone caulk. Tested operation using UV-resistant goggles. Completed installation in 2 hours, enhancing indoor air quality and reducing airborne pathogens.

Joe P.

Repaired Lennox XC16 air conditioner today. Diagnosed faulty compressor contactor using Fluke 116 HVAC multimeter. Replaced with new Honeywell DP2030A5004 contactor. Recharged system with R410A refrigerant using Yellowjacket 42006 manifold gauge set. Cleaned condenser coils with Nu-Calgon 4171-75 Evap Foam. Tested amperage draw with UEi DL389 clamp meter. Verified proper operation, achieving 18°F delta T across evaporator. Completed repair in 3 hours, restoring optimal cooling performance.

Charles L.

Performed cooling HVAC maintenance today. Cleaned Trane XR14 condenser coils with Nu-Calgon Evap Foam. Replaced air filter with MERV 11 pleated filter. Checked refrigerant levels using Fieldpiece SMAN460 manifold gauge set. Cleaned condensate drain line with CO2 cartridge blaster. Lubricated fan motor bearings with 3-IN-ONE motor oil. Tested capacitor with Fluke 902 FC HVAC meter. Inspected ductwork for leaks. Calibrated Honeywell T6 Pro thermostat. Maintenance completed in 2.5 hours.

Terry B.

Completed the installation of a whole-home air purification system to improve indoor air quality. Installed an Aprilaire Model 5000 electronic air cleaner, which uses advanced filtration to remove particulates, allergens, and pollutants from the air. Integrated the system with the existing HVAC unit for seamless operation. Tested the system to ensure optimal performance and explained maintenance procedures to the homeowner. This installation will significantly enhance indoor air quality, providing a healthier living environment. Regular filter changes and periodic inspections are recommended to maintain system efficiency.

Charles L.

Inspected an AC unit that was not cooling. The system, which is 20 years old, showed significant rust and wear. Checked refrigerant levels and found the compressor was failing. Due to the unit's age and condition, I provided an estimate for a new HVAC system. Recommended a Carrier Comfort Series 14 SEER packaged system for optimal performance. Advised the customer on energy savings, warranty options, and the benefits of upgrading to a modern system. Regular maintenance will extend the life and efficiency of the new installation.

Terry B.

Replaced a failed thermocouple on a Lennox G61 natural gas furnace. Shut off gas supply and removed burner assembly. Installed new Q3200U universal thermocouple properly positioned in pilot flame. Reassembled burners and restored gas service. Used combustion analyzer to verify proper fuel/air mixture. Cycled heating sequences to confirm safe ignition before leaving job site.

David C.

Recently, I addressed a malfunctioning compressor in an AC unit located in Citrus Springs, FL. The issue led to the system's inability to cool effectively. After diagnosing the problem, I replaced the faulty compressor and conducted a system pressure check to ensure no other underlying issues. Post-repair, I cleaned the unit's filters and adjusted the airflow for optimal performance, restoring a comfortable and cool indoor environment.

Cara B.

I conducted a repair on a Carrier Infinity 21 Central Air Conditioner. This involved diagnosing the system for faults, resulting in the replacement of a faulty capacitor (model CAP-024-250) and a worn fan motor (model FM-055). Post-replacement, I recharged the system with R-410A refrigerant to optimal levels and tested for efficient cooling and operational integrity, ensuring the unit's peak performance.

David C.

Just completed an AC repair job in Citrus Springs, FL. The customer's unit had a refrigerant leak, resulting in insufficient cooling. Using electronic leak detection tools, I located and repaired the damaged area before recharging the system with the appropriate refrigerant. Additionally, I cleaned the coils and ensured proper airflow. The AC is now running smoothly, maintaining a cool and comfortable home environment.

Charles L.

Conducted heating maintenance for a homeowner, ensuring the furnace operates efficiently throughout the winter. Checked and replaced filters, ensuring optimal performance.

Cara B.

Air conditioner repair: A resident reported reduced cooling efficiency. After conducting a thorough examination, I identified a refrigerant leak in the air conditioning system. I sealed the leak, recharged the refrigerant, and performed a system check to ensure optimal cooling.

David C.

Performed standard fall maintenance on customer's furnace. The system was thoroughly checked for any signs of wear and tear. The area around the unit was cleaned and the filters were replaced. The system was then tested for proper performance. The unit is in very good shape and will work well for the customer during the winter season.

Joe P.

Went out to a customer's home to provide fall maintenance on their HVAC system. Upon my arrival, I thoroughly checked the units' electrical, mechanical, and safety components. I then tested the system for proper performance. There were no issues found with the unit and the HVAC is running properly for the home. The customer was pleased with the service.

David C.

Went out to a residential home to install a new air conditioning system. The customer's current system was old and they want to replace the unit with an updated one. We removed the outdated system and disposed of it. The new unit was then carefully installed, with all components being meticulously put into place. We then tested the system to ensure optimal temperature and humidity levels. The customer was pleased with the service.

Cara B.

Air conditioning repair for a residential customer. The homeowner had called because they were concerned about their air conditioning system. Upon arrival, I inspected the unit and found that the condensate drain was clogged and causing the issue. I cleared the condensate drain line to resolve the issue. The system is now operating as it should for the home.

Joe P.

Went out to a home who was experiencing cooling issues with their air conditioning system. Upon arrival, carefully inspected the system and found the thermostat had broken wires that were causing the system to malfunction. We were able to replace the thermostat's wires to bring the system back to working order. Tested the system to ensure it was working properly before leaving. The customer was pleased with the repair.

Joe P.

Provided an air conditioning repair service for a residential customer. Their system was providing low airflow to the home. Upon arrival, the thermostat was checked and recalibrated. We also flushed the lines, cleaned the unit and replaced the air filters. The maintenance did the trick, and the system is now operating as it should.

David C.

Installed a new air conditioning system for a residential customer. Upon arrival, removed the old system and carefully installed the new unit. Tested the system to ensure everything was working properly. The new unit will be reliable for the home, efficiently cooling it during these hot months. The customer was pleased with the replacement.

Joe P.

Arrived at a residential home to repair a customer's air conditioning system. Inspected the system and found that the condenser fan motor was locked and the capacitor was leaking. Installed a new condenser fan and capacitor in the unit. After talked with the homeowner, I also replaced the thermostat and air filters. The system is running optimally for the home.

Cara B.

Went out on a repair call for a customer whose air conditioning system was not working. Upon inspecting the system, found that the condensate drain was clogged and causing the problem. Cleared the condensate drain line and rechecked the system. Found no other issues. The customer was pleased with the repair.

Charles L.

Visited a residential customer to perform air conditioning maintenance on their system. Performed a tune-up to keep it running smoothly for them. There were no blockages and the thermostat was working properly. Only needed to change the filters. Customer was happy to hear that their system was working well.

David C.

Charles L.

Replaced bad run cap and repaired airhandler stand.

David C.

Pm maintenance, customer pleased with service

Charles L.